OTROS GRUPOS DE PRODUCTOS
Mortar Grinder
PULVERISETTE 2
Please note: The standard equipment delivered with the Mortar Grinder PULVERISETTE 2 does not include grinding sets. Mortars and pestles must be ordered as accessories. For contamination-free sample grinding, select the grinding set of your Mortar Grinder from seven different materials – the appropriate pestle and scraper are also supplied. A grinding set made of stainless steel without a plastic frame is available, especially for cryogenic grinding using liquid nitrogen to embrittle the material to be ground.
Grinding sets
-
Material data for the grinding sets
Material Main component of the material Density g/cm³ Abrasion resistance Used for grinding material Agate SiO2 2.65 Good Soft to medium-hard samples, metal-free grinding Sintered corundum Al2O3 (99.7 %) 3.8 Fairly good Medium-hard, soft, brittle samples Hard porcelain SiO2-Al2O3 (40%) 2.4-2.5 Sufficient Soft, fibrous samples Zirconium oxide ZrO2 5.7 Very good Fibrous, abrasive samples Hardened steel Fe - Cr 7.9 Good Hard, medium-hard, brittle samples Hardmetal tungsten carbide WC 14.95 Very good Hard, medium-hard, abrasive samples Stainless steel Fe - Cr - Ni 7.8 Good Medium-hard, brittle samples, cryogenic grinding of moist, fibrous and elastic samples
Grinding sets consist of a high centralised mortar bowl rimmed in a plastic frame, pestle and scraper. A grinding set made of stainless steel without a plastic frame is available, especially for cryogenic grinding using liquid nitrogen to embrittle the material to be ground.
Grinding Sets
consisting of a high centralised mortar bowl made of agate rimmed in a plastic frame, pestle and scraper.
General material specification:
Material: agate - SiO2
Abrasion resistance: good
Suitable for: soft to medium-hard samples, metal-free grinding
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Agate – SiO2 |
| Chemical composition | |
| Element | Share % |
| Silicon oxide– SiO2 | 99.9 |
| Aluminium – Al2O3 | < 0.02 |
| Iron oxide – Fe2O3 | < 0.02 |
| Calcium oxide – CaO | < 0.02 |
| Magnesium oxide – MgO | < 0.02 |
| Sodium oxide – Na2O | < 0.02 |
| Potassium oxide – K2O | < 0.02 |
| Manganese oxide – MnO | < 0.02 |
| Physical and mechanical properties | |
| Density | 2.65 g/cm³ |
| Hardness | 6.5 – 7 Mohs |
Explanations on hardness data
consisting of a high centralised mortar bowl made of sintered corundum rimmed in a plastic frame, pestle and scraper.
General material specification:
Material: sintered corundum 1 - Al2O3
Abrasion resistance: fairly good
Suitable for: medium-hard, soft, brittle samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Sintered corundum 1 – Al2O3 |
| ISO/EN/DIN code | |
| Chemical composition | |
| Element | Share % |
| Aluminium oxide – Al2O3 | 99.651 |
| Silicon oxide – SiO2 | 0.257 |
| Calcium oxide – CaO | 0.081 |
| Other | 0.011 |
| Physical and mechanical properties | |
| Density | 3.8 g/cm³ |
| Hardness | 18.000N/mm² (Vickers HV 0.5) |
Explanations on hardness data
consisting of a high centralised mortar bowl made of hard porcelain rimmed in a plastic frame, pestle and scraper.
General material specification:
Material: hard porcelain - SiO2-AL2O3
Abrasion resistance: sufficient
Suitable for: soft, fibrous samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Hard porcelain |
| ISO/EN/DIN code | |
| Chemical composition | |
| Element | Share % |
| Quartz – SiO2 | 68.5 |
| Aluminium oxide - Al2O3 | 26.1 |
| Titanium oxide - TiO2 | 0.10 |
| Iron oxide - Fe2O3 | 0.52 |
| Manganese oxide - MgO | 0.20 |
| Calcium oxide - CaO | 0.09 |
| Sodium oxide - Na2O | 0.20 |
| Potassium - K2O | 3.92 |
| Physical and mechanical properties | |
| Density | 2.4 – 2.5 g/cm³ |
| Open porosity | < 0.5% |
Explanations on hardness data
consisting of a high centralised mortar bowl made of zirconium oxide rimmed in a plastic frame, pestle and scraper.
General material specification:
Material: zirconium oxide - ZrO2
Abrasion resistance: very good
Suitable for: fibrous, abrasive samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Zirconium oxide - ZrO2 |
| Chemical composition | |
| Element | Share % |
| Zirconium oxide – ZrO2 | 94.2 - 95.2 |
| Hafnium oxide – HfO2 | 1 - 2 |
| Magnesium oxide – MgO | 3.5 |
| Silicon dioxide – SiO | 0.1 |
| Aluminium oxide – Al2O3 | 0.1 |
| Other | 0.1 |
| Physical and mechanical properties | |
| Density | 5.7 g/cm³ |
| Hardness Vickers | 1200 (HV10) |
Explanations on hardness data
consisting of a mortar bowl made of stainless steel, pestle and scraper.
The mortar bowl totally made of stainless steel can be easily cleaned, assures a defined abrasion of only one material and can be filled with liquid nitrogen for cooling/brittleness the sample to be ground.
General material specification:
Material: stainless steel - 1.4305
Abrasion resistance: good
Suitable for: medium-hard, brittle samples, cryogenic grinding of moist, fibrous and elastic samples.
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Stainless steel – 1.4305 |
| ISO/EN/DIN code | X10CrNiS18-9 / X8CrNiS18-9 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 70.6 – 66.4 |
| Carbon – C | 0.10 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.15 – 0.35 |
| Chromium – Cr | 17 – 19 |
| Nickel – Ni | 8 – 10 |
| Copper – Cu | 1.00 |
| Nitrogen – N | 0.11 |
| Physical and mechanical properties | |
| Density | 7.8 g/cm³ |
| Hardness | approx. 60 HRB |
Explanations on hardness data
consisting of a high centralised mortar bowl made of hardened steel rimmed in a plastic frame, pestle and scraper.
General material specification:
Material: hardened steel - 1.2080
Abrasion resistance: good
Suitable for: hard, medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Hardened steel - 1.2080 |
| ISO/EN/DIN code | X210Cr12 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 85.5 |
| Carbon – C | 1.90 – 2.20 |
| Silicon – Si | ≤ 0.10 – 0.40 |
| Manganese – Mn | ≤ 0.15 – 0.45 |
| Phosphorus – P | ≤ 0.030 |
| Sulphur – S | ≤ 0.030 |
| Chromium – Cr | 11.00 – 12.0 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 60 – 63 HRC |
Explanations on hardness data
consisting of a high centralised mortar bowl made of hardmetal tungsten carbide rimmed in a plastic frame, pestle and scraper.
General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: hard, medium-hard, abrasive samples
Detailed information about the material you will find in the element analysis.
| General specifications | |
| Material | Tungsten carbide - WC |
| ISO/EN/DIN code | |
| Chemical composition | |
| Element | Share % |
| Tungsten carbide – TC | 93.8 |
| Cobalt – Co | 6.0 |
| Other | 0.2 |
| Physical and mechanical properties | |
| Density | 14.95 g/cm³ |
| Hardness | 92.1 HRA |
Explanations on hardness data
Certification
IQ/OQ documentation for the independent utilization for the support of instrument qualification in the quality management system for the Mortar Mill PULVERISETTE 2.
Certification
IQ/OQ documentation (questionnaire format - implementation by customer)
for the independent utilization for the support of instrument qualification in the quality management system for the Mortar Grinder PULVERISETTE 2.
Spare parts
Spare scraper vulkollan.
Spare Scraper
Spare scraper vulkollan (Polyurethane), 6 mm thick.
