Otros Cutting Mills
OTROS GRUPOS DE PRODUCTOS
Universal Cutting Mill - variable speed 50-700 rpm
PULVERISETTE 19
Detalles del producto
Technical Data
| Working principle | cutting |
| Optimal for material type | hard, tough-elastic, temperature-sensitive samples |
| Cutting tools | rotor with V-cutting edges and fixed knives, rotor with notched edges, rotor with straight cutting edges and fixed knives, disk milling cutter rotor with indexable inserts and fixed knives |
| Materials of the cutting tools | hardened stainless steel, hardmetal tungsten carbide, chromium-free tool steel, stainless steel 316L, chromium-free steel DC01 |
| Max. feed size (depending on the material and funnel) | 70 x 80 mm |
| Max. throughput (depending on the material and sieve size) | 60 l/h |
| Final fineness (depends on sieve cassette also available in further perforations) | 0.1 - 20 mm |
| Feeding | batchwise/continuous |
| Variable rotor speed | 50-700 rpm |
| Rotor peripheral speed | 0.26-3.66 m/s |
| Drive | Up to 2.8 kW three-phase motor with frequency converter and flywheel mass for stabilising the drive torque |
| Electrical Details | 380-460 V/3~, 50-60 Hz, 2800 watt, 67 Nm |
| Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, rotor and sieve cassette used) | LpAd = 75 dB |
| Weight | 77 kg |
| Dimensions (W x D x H) | table mounted, on support frame or on table-top stand 44 x 79 x 56 cm |
The Universal Cutting Mill PULVERISETTE 19 with variable rotational speed 50-700 rpm is also available in the following voltages and versions:
| Order no. | Electrical details / Torque |
| (three-phase motor with frequency converter and flywheel mass for stabilising the drive torque) | |
| 19.3040.00 | for 380-460 V/3~, 50-60 Hz, 2800 watt, 67 Nm |
| 19.3000.00 | for 200-240 V/1~, 50-60 Hz, 2350 watt, 26 Nm |
| 19.3010.00 | for 100-120 V/1~, 50-60 Hz, 1725 watt, 24 Nm |
The PULVERISETTE 19 with voltage of “/3~”can only be operated on a three-phase supply network.
Despite the frequency converter, the three-phase version “/3~” is definitely preferable instead of a single-phase version “/1~”, because the three-phase version achieves a higher torque mass and pulling power.
The single-phase versions of the Universal Cutting Mills PULVERISETTE 19 also have an especially maintenance-free three-phase motor with a frequency converter.
